|
|
| MVMA Specifications Form Passenger Car | Car Line Mustang II Model Year 1978 Issued Revised (o) |
| |
| Engine Displacement | |||||
| |||||
| Drive Units - Propeller Shaft |
| Number used | One | ||||
| Type (straight tube, tube-in-tube internal-external damper, etc.) |
Straight Tube (Cardboard Lined) with Tuned Damper | ||||
| Outer diam. x length* x wall thick- ness |
Manual 3-speed trans. | Not Available | |||
| Manual 4-speed trans. | 3.50 x 46.00 x .065 (a) | 3.50 x 45.64 x .065 (b) | |||
| Automatic transmission | 3.50 x 49.88 x .065 (a)(c) 3.50 x 47.73 x .065 (a)(d) |
3.00 x 49.44 x .065 (b)(c) 3.50 x 47.13 x .065 (b)(d) |
3.50 x 46.73 x .065 (b)(d) | ||
| Inter- mediate bearing |
Type (plain, anti-friction) | None | |||
| Lubrication (fitting, prepack) | None | ||||
| Slip Yoke | Type | Tuned Damper Design | |||
| Number of teeth | C3 & Man. Trans. - 25; C4 - 28 | 28 | |||
| Spline O. D. | 1.115 Max. | 1.220 Max. | |||
| Universal joints |
Make and Mfg. No. | Ford 1310 | |||
| Number used | Two | ||||
| Type (ball & trunnion, cross) | Cross | ||||
| Rear attach (ubolt, clamp) | "U"-Bolt | ||||
| Bearing | Type (plain, anti-friction) |
Needle Roller | |||
| lubirc. (fitting, prepack) | Pre-Pack | ||||
| Drive take through (torque tube or spring arms, springs) |
Rear Springs | ||||
| Torque taken through (torque tube or spring arms, springs) |
Rear Springs | ||||
| (a) 6-3/4" Axle (b) 8" Axle (c) C3 Automatic (d) C4 Automatic |
| Page 20 | |
|
|
| Copyright 1999 - 2007 Mustang II Network - Privacy Policy |
| |
