mustang ii      
MVMA Specifications Form
Passenger Car
Car Line     Mustang II     
Model Year     1977    Issued    9-76    Revised (o)      
 Body Type And/Or Engine Displacement, Etc
 
60F 60H 69F 69R
Suspension - General
Provision for car leveling None
Provision for brake dip control Tilted Upper Control Arm Anti-Dive Front Suspension
Provision for acc. squat control Asymmetrical Type Rear Spring Mounting
Special provisions for car jacking         Side of Car -- Outside Rocker Panel Flanges, Front & Rear
Shock
absorber
front & rear
Type Direct Acting, Rebound Stop and Integral Jounce Bumper - Front
Make Motorcraft
Piston diameter 1.00 (1.18 for H.D.)
Other special features - Scissors Jack & Wrench
-Staggered Rear Shock Absorber Installation (a)

Suspension - Front
Type and description Independent Short/Long Arm W/Ball Joints, Spring on LWR. Arm.
Travel (Design) Full Jounce 3.59 3.59 3.59 3.59
Full Rebound 3.17 3.17 3.17 3.17
Spring Type (coil, leaf, other)           Coil
Material SAE 1060 Boron Steel
Size (coil design height & I.D., bar length x dia.) 8.50 x 3.50 (coil); 108.5 Bar Length; 0.57 Bar Diameter
Spring rate (lb. per in.) (b) 300 lb. per in., 350 lb. per in (H.D.)
Rate at wheel (lb. per in.) (b) 118 lb. per in., 136 lb. per in (H.D.)
Stabilizer type (link, linkless, frameless) Link Type
Material & bar diameter SAE 1090 Steel - .75 Dia. (Std.); 1.00 (Opt.)

Suspension - Rear
Type and description Hotchkiss Drive
Drive and torque taken through Rear Springs
Travel (Design) Full Jounce 3.19 3.19 3.19 3.19
Full Rebound 3.89 3.89 3.89 3.89
Spring Type (coil, leaf, other)           Semi-Elliptical Leaf
Material SAE 5160 Steel
Size (length x width, coil design height & I.D., bar length & dia.) 50.0 x 2.5 All Models
Spring rate (lb. per in.) see below (c)
Rate at wheel (lb. per in.) see below (d)
Mounting insulation type Rubber Bushings
If leaf No. of leaves 4 plus Stub Leaf - all models & H.D.
Shackle (comp. or tens.) Compression
Stabilizer type (link, linkless, frameless) Link Type
Material & bar diameter SAE 1090 Steel - Dia. .75 with optional H.D. suspension
Track bar type None
(a) Adjustable Rebound Control - H.D.
(b) Base Vehicle, Model 60F
(c)103 Std. all engines; 127 H.D. All
(d)107 Std. all engines; 131 H.D. All


Page 24
From the collections of Henry Ford Museum & Greenfield Village Research Center

  Copyright 1999 - 2007 Mustang II Network  -  Privacy Policy