|
|
| MVMA Specifications Form Passenger Car | Car Line Mustang II Model Year 1977 Issued 9-76 Revised (o) |
| |
| Engine Displacement | ||||||
| ||||||
| Engine - Cooling System |
| Type system (pressure, pressure vented, atmospheric, other) |
Pressure | |||||||||
| Radiator cap relief valve pressure | 12 - 16 PSI | |||||||||
| Circula- tion thermostat |
Type (choke, bypass) | By-Pass | Controlled By-Pass - Poppet | |||||||
| Starts to open at (°F) | 188°F - 195°F | 183°F - 190°F | ||||||||
| Water Pump |
Type (centrifugal, other) | Centrifugal - Vane | ||||||||
| GPM 1000 pump rpm | 13.1 | |||||||||
| Number of pumps | One | |||||||||
| Drive (V-belt, other) | V-Belt | |||||||||
| Bearing type | Double Row, Sealed, Ball and Ball (2.3L 3/4"; 2.8L 5/8") | |||||||||
| By pass recirculation type (int., ext.) | Internal | External (By-Pass Plus Choke) | ||||||||
| Radiator core type (cross-flow, vertical, cellular, tube and fin, other) |
Down Flow - Tube and Slit Fin | |||||||||
| Cooling system capacity | With heater (qt.) | 8.5 | 8.8 Automatic; 8.3 Manual | |||||||
| Without heater (qt) | 7.8 | 8.0 | ||||||||
| Optional equipment specify (qt) |
9.1 with A/C | 9.0 with A/C | ||||||||
| Water jackets full len. of cyl (yes no) | Yes | |||||||||
| Water all around cylinder (yes, no) | Yes | |||||||||
| Radiator hose |
Lower | Number and type (molded, straight) |
One - Molded | |||||||
| Inside diameter | 1.25 at Radiator 1.50 at Water Outlet Conn. |
1.25 | ||||||||
| Upper | Number and type (molded, straight) |
One - Molded | ||||||||
| Inside diameter | 1.25 at Radiator 1.18 at Water Outlet Conn. |
1.25 | ||||||||
| By-pass | Number and type (molded, straight) |
None | One - Molded | |||||||
| Inside diameter | -- | By-Pass: .95 one end, .79 other | ||||||||
| Fan | Number of blades and spacing | 4 Uneven | 5 Uneven | 4 Uneven | 5 Uneven | |||||
| Diameter | 16.00 x 1.38 | 16.50 x 2.00 | 16.00 x 1.38 | 17.06 x 1.89 | ||||||
| Ratio-fan to crankshaft rev | 1.05:1 | 1.05:1 | 1.05:1 | 1.15:1 | ||||||
| Fan cutout type | None | Flex Blade | None | Flex Blade | ||||||
| Bearing type | Double Row, Sealed, Ball & Ball (Water Pump Bearing) | |||||||||
| *Drive belts (indicate belt used by letter) | Fan | |||||||||
| Generator or alternator | A | B | A | B | F | F | ||||
| Water pump & fan | A | B | AD | BD | F | F | ||||
| Power steering | B | B | G | G | ||||||
| Air conditioning | ED | ED | H | |||||||
| Crankshaft | AC | BC | AD | BD | FG | FGH | ||||
| Idler or (Air Pump) | (C) | (C) | (E) D | (E) D | (F) | (F)H | ||||
| *Drive Belt Dimensions | A | B | C | D | E | F | G | H | I | J | K |
| Angle of V | 36° | 36° | 36° | 36° | 36° | 36° | 36° | 36° | |||
| Normal length (SAE) | 43.25 | 54.50 @ | 36.75 | 46.00 | 34.50 | 51.00 | 42.50 | 53.50 | |||
| Width | 3/8 | 3/8 | 1/4 | 1/2 | 1/4 | 15/32 | 15/32 | 1/2 |
| @ Dual Belts |
| Page 12 | |
|
|
| Copyright 1999 - 2007 Mustang II Network - Privacy Policy |
| |
