| Type of lubrication (splash, pressure, nozzle) |
Main Bearings |
Pressure |
| Connecting rods |
Pressure |
| Piston pins |
Oil Mist and Splash |
| Camshaft bearings |
Pressure |
| Tappets |
Pressure |
Splash and Drain Back |
Pressure |
| Timing gear or chain |
None |
Metered Stream |
Splash |
| Cylinder walls |
Oil Mist and Splash |
(a) |
Oil Mist and Splash |
| Oil pump Type |
Rotor |
| Normal oil pressure (lb. @engine rpm) |
50 PSI @ 2000 RPM |
40 - 55 PSI @ 1500 RPM |
40 - 60 PSI @ 200 RPM |
| Oil press. sending unit (elec or mech) |
Electrical Switch |
| Type oil intake (floating, stationary) |
Stationary, Shrouded Screen in Sump |
| Oil filter system (full flow, part, other) |
Full Flow |
| Filter replacement (element,complete) |
Complete |
| Capacity of c/case, less filter refill (qt) |
4 + .5 for Filter |
4.5 + .5 for Filter |
4 + 1 for Filter |
| Oil Grade recommended (SAE viscosity and temperature range) |
Multi-Viscosity
+32°F & Above - SAE20W-40
0°F & Above - SAE10W-40
-10°F to +90° - SAE10W-30
-32°F to +32°F - SAE5W-30 |
Single Viscosity
+60°F & Above - SAE40
+32°F to +90° - SAE30
+10°F to +60°F - SAE20-20W
-10°F to +32°F - SAE10-10W |
|
| Engine service reqmt. (SD, SE, etc) |
SE (Ford Specification ESE-M2C-101-C) |
| Type (single, single with cross-over, dual, other) |
Single |
| Muffler No. & type (reverse flow, straight thru, seperate resonator) |
One, Reverse Flow
One, Resonator - Seperate |
| Exhaust pipe dia. (O.D., wall thick.) |
Branch |
Not Applicable |
1.75 x .084 Laminated |
2.00 X .084 Laminated |
| Main |
2.00 x .084 Laminated |
2.00 x .075 / 1.75 x .075 |
2.00 x .075 / 1.75 x .075 |
| Tail pipe dia. (O.D. & wall thickness) |
2.00 x .060 Solid |
1.88 x .075 |
2.25 x .060 |
