|
|
| MVMA Specifications Form Passenger Car | Car Line Mustang II Model Year 1975 Issued 9-74 Revised (o) |
| |
| Body Type | ||
|
| Vehicle Fiducial Marks |
| Fiducal Mark Number * |
Define Coordinate Location | |||
|
Front 1 & 2 3 & 4 Rear 5 & 6 |
The front vertical edge of the master control notch on the under side of the front door rocker panels locates the "x" coordinate relative to body grid. The intersection of the lower and inboard surfaces (outside of metal) of the rocker panel door rabbit locates the "y" and "z" coordinates relative to body grid at particular fore-aft inch lines. The fore-aft location can be determined by using the reference dimension from Fiducial Mark 1 & 2. Same as 3 & 4 above. |
|||
| Fiducal Mark Number |
Coordinate Location of Fiducial Mark | Fiducial Mark to Ground at Curb ** | ||
| X | Y | Z | ||
| 1 & 2 3 & 4 5 & 6 |
+20.000 +19.500 +50.000 |
N.A. * +/-29.075 +/-29.055 |
N.A. * +.135 -.165 |
(RH and LH Symmetrical) (RH and LH Symmetrical) (RH and LH Symmetrical) |
| * N.A. denotes: not applicable from this control point. ** Denotes: Not the responsibility of body engineering office. |
| Page 29 | |
|
|
| Copyright 1999 - 2007 Mustang II Network - Privacy Policy |
| |
