Home	Welcome  Center	Exclusives	Tech  Center	Parts	Photo  Gallery	Multimedia	Registry	Merchandise
1974  |   1975  |   1976  |   1977  |   1978  |   Articles  |   VIN Decoder  |   Doortag Decoder  |   Buck Tag Codes
History / Main Menu  |   Option list  |   Exterior Colors  |   Interior Trim  |   Press Release  |   Fleet Preview  |   MVMA Specs

MVMA Specifications Form Passenger Car	Car Line     Mustang II      Model Year     1975    Issued    9-74    Revised (o)

	Body Type And/Or Engine Displacement, Etc
	60F 60H 69F 69R

Suspension - General

Provision for car leveling		None
Provision for brake dip control		Tilted Upper Control Arm Anti-Dive Front Suspension
Provision for acc. squat control		Asymmetrical Type Rear Spring Mounting
Special provisions for car jacking		Side of Car -- Outside Rocker Panel Flanges, Front & Rear
Shock absorber front & rear	Type	Direct Acting, Rebound Stop and Integral Jounce Bumper - Front
	Make	Motorcraft
	Piston diameter	1.00
Other special features		- Scissors Jack & Wrench -Staggered Rear Shock Absorber Installation

Suspension - Front

Type and description		Independent Short/Long Arm W/Ball Joints, Spring on LWR. Arm.
Travel (Design)	Full Jounce	3.51	3.51	3.51	3.51
	Full Rebound	3.49	3.49	3.49	3.49
Spring	Type (coil, leaf, other)	Coil
	Material	SAE 1060 Boron Steel
	Size (coil design height & I.D., bar length x dia.)	8.50 x 3.50 (coil); 105.1 Bar Length; 0.57 Bar Diameter
	Spring rate (lb. per in.) (a)	325 lb. per in.
	Rate at wheel (lb. per in.) (a)	97 lb. per in.
Stabilizer	type (link, linkless, frameless)	Optional Handling Suspension - Link Type
	Material & bar diameter	SAE 1090 or SAE 5160 Steel - .75 Dia. (Std.); .95 (Opt.)

Suspension - Rear

Type and description			Hotchkiss Drive
Drive and torque taken through			Rear Springs
Travel (Design)	Full Jounce		3.22	3.22	3.22	3.22
	Full Rebound		3.86	3.86	3.86	3.86
Spring	Type (coil, leaf, other)		Semi-Elliptical Leaf
	Material		SAE 5160 Boron Steel or SAE 5147 or SAE 5155
	Size (length x width, coil design height & I.D., bar length & dia.)		50.0 x 2.5 All Models
	Spring rate (lb. per in.)		see below (b)
	Rate at wheel (lb. per in.)		see below (c)
	Mounting insulation type		Rubber Bushings
	If leaf	No. of leaves	4 plus Stub Leaf - all models & H.D.
		Shackle (comp. or tens.)	Compression
Stabilizer	type (link, linkless, frameless)		Link Type
	Material & bar diameter		SAE 1060 Steel - Dia. .75 with optional H.D. suspension, .57 with 69R, 302 engine and base susp.
Track bar type			None

(a) Base Vehicle, Model 69F (b)101 Std. all engines except 302; 106 std. with 302 engine; 124 H.D. All (c)110 Std. all engines except 302; 115 std. with 302 engine; 133 H.D. All

Page 24

From the collections of Henry Ford Museum & Greenfield Village Research Center

Copyright 1999 - 2010 Mustang II Network  -  Privacy Policy