|
|
| MVMA Specifications Form Passenger Car | Car Line Mustang II Model Year 1974 Issued 9-73 Revised (o) |
| |
| Engine Displacement | ||||||
| ||||||
| Engine - Lubrication System |
| Type of lubrication (splash, pressure, nozzle) | Main Bearings | Pressure | |
| Connecting rods | Pressure | ||
| Piston pins | Oil Mist and Splash | ||
| Camshaft bearings | Pressure | ||
| Tappets | Pressure | Splash and Drain Back | |
| Timing gear or chain | None | Metered Stream | |
| Cylinder walls | Oil Mist and Splash | Timed Pressure Stream & Splash | |
| Oil pump Type | Gerotor | ||
| Normal oil pressure (lb. @engine rpm) | 50 PSI @ 2000 RPM | 40-55 PSI @ 1500 RPM | |
| Oil press. sending unit (elec or mech) | Electrical Switch | ||
| Type oil intake (floating, stationary) | Stationary | ||
| Oil filter system (full flow, part, other) | Full Flow | ||
| Filter replacement (element,complete) | Complete | ||
| Capacity of c/case, less filter refill (qt) | 4 Plus 1 for Filter | 4 Plus .5 for Filter | |
| Oil Grade recommended (SAE viscosity and temperature range) | Multi-Viscosity +32°F & Above - SAE20W-40 0°F & Above - SAE10W-40 -10°F to +90° - SAE10W-30 -32°F to +32°F - SAE5W-30 |
Single Viscosity +60°F & Above - SAE40 +32°F to +90° - SAE30 +10°F to +60°F - SAE20-20W -10°F to +32°F - SAE10-10W |
|
| Engine service reqmt. (SD, SE, etc) | SE (Ford Specification ESE-M2C-101-C) | ||
| Engine - Exhaust System |
| Type (single, single with cross-over, dual, other) | Single | Dual with Cross-Over | |
| Muffler No. & type (reverse flow, straight thru, seperate resonator) | One, Reverse Flow One, Resonator - Seperate |
One, Reverse Flow Two Resonators - Seperate |
|
| Exhaust pipe dia. (O.D., wall thick.) | Branch | Not Applicable | 1.25 x .075 Solid |
| Main | 2.0 x .084 Laminated | 1.75 x .084 Laminated | |
| Tail pipe dia. (O.D. & wall thickness) | 1.88 x .060 Solid | 1.88 x .060 Solid | |
| Page 9 | |
|
|
| Copyright 1999 - 2010 Mustang II Network - Privacy Policy | |
