|
|
| MVMA Specifications Form Passenger Car | Car Line Mustang II Model Year 1974 Issued 9-73 Revised (o) 12-73 |
| |
| Engine Displacement | ||||
| ||||
| Drive Units - Clutch (Manual Transmission) |
| Make & type | Single Disc. Dry Plate | ||
| Type pressure plate springs | Belleville Spring | ||
| Total spring load (lb.) | 990 | 1200 | |
| No. of clutch driven discs | One | ||
| Clutch facing |
Material | Woven Asbestos | |
| Outside & inside dia. | 8.5 x 5.75 | 9.5 x 6.0 | |
| Total eff. area (sq. in.) | 61.56 | 85.22 | |
| Thickness | .125 | ||
| Engagement cushioning method |
Torbend Disk | ||
| Release bearing |
Type & method of lubrication |
Angular Contact, Prepacked | |
| Tortional damping |
Methods, springs, friction material |
Steel Coil Springs | |
| Drive Units - Transmissions |
| Manual 3-speed (std., opt. N.A.) | NA | NA |
| Manual 4-speed (std., opt. N.A.) | Std. | Std. |
| Automatic (std., opt. N.A.) | Opt. | Opt. |
| Drive Units - Manual Trans. |
| Number of forward speeds | Four | Four | ||
| Transmission ratios |
In first | 3.50:1 | 3.50:1 | |
| In second | 2.21:1 | 2.21:1 | ||
| In third | 1.43:1 | 1.43:1 | ||
| In fourth | 1.00:1 | 1.00:1 | ||
| In reverse | 3.38:1 | 3.38:1 | ||
| Synchronous meshing, specify gears | 1st, 2nd, 3rd, 4th | |||
| Shift lever location | Floor | |||
| Lubricant | Capacity (pt.) | 4.0 | ||
| Type Recommended | ESW-M2C 83B | |||
| SAE vis- cosity number |
Summer | 80 | ||
| Winter | 80 | |||
| Extreme cold | ||||
| Page 17 | |
|
|
| Copyright 1999 - 2010 Mustang II Network - Privacy Policy | |
