|
|
| MVMA Specifications Form Passenger Car | Car Line Mustang II Model Year 1974 Issued 9-73 Revised (o) 12-73 |
| |
| Engine Displacement | ||||||
| ||||||
| Engine - Cooling System |
| Type system (pressure, pressure vented, atmospheric, other) |
Pressure | |||||||||
| Radiator cap relief valve pressure | 12 - 16 PSI | |||||||||
| Circula- tion thermostat |
Type (choke, bypass) | By-Pass | Controlled By-Pass - Poppet | |||||||
| Starts to open at (°F) | 183°F - 190°F | |||||||||
| Water Pump |
Type (centrifugal, other) | Centrifugal - Vane | ||||||||
| GPM 1000 pump rpm | 13.1 | |||||||||
| Number of pumps | One | |||||||||
| Drive (V-belt, other) | V-Belt | |||||||||
| Bearing type | Double Row, Sealed, Ball and Ball (2.3L 3/4"; 2.8L 5/8") | |||||||||
| By pass recirculation type (int., ext.) | Internal | External (By-Pass Plus Choke) | ||||||||
| Radiator core type (cross-flow, vertical, cellular, tube and fin, other) |
Down Flow - Tube and Slit Fin | |||||||||
| Cooling system capacity | With heater (qt.) | 8.8 | 12.5 | |||||||
| Without heater (qt) | 7.8 | 11.5 | ||||||||
| Optional equipment specify (qt) |
9.2 with A/C | 12.8 with A/C | ||||||||
| Water jackets full len. of cyl (yes no) | Yes | |||||||||
| Water all around cylinder (yes, no) | Yes | |||||||||
| Radiator hose |
Lower | Number and type (molded, straight) |
One - Molded | |||||||
| Inside diameter | 1.25 at Radiator 1.50 at Water Outlet Conn. |
1.25 | ||||||||
| Upper | Number and type (molded, straight) |
One - Molded | ||||||||
| Inside diameter | 1.25 at Radiator 1.18 at Water Outlet Conn. |
1.25 | ||||||||
| By-pass | Number and type (molded, straight) |
None | Two: By-Pass Hose and Choke Heat Water Hose | |||||||
| Inside diameter | -- | By-Pass: .95 one end, .79 other, Choke Heat Hose: .61 | ||||||||
| Fan | Number of blades and spacing | 4 Uneven | 5 Uneven | 4 Uneven | 5 Uneven | |||||
| Diameter | 16.00 x 1.38 | 16.50 x02.00 | 16.00 x 1.38 | 16.50 x 2.00 | ||||||
| Ratio-fan to crankshaft rev | 1.05:1 | 1.05:1 | 1.05:1 | 1.05:1 | ||||||
| Fan cutout type | None | Flex Blade | None | Flex Blade | ||||||
| Bearing type | Double Row, Sealed, Ball & Ball (Water Pump Bearing) | |||||||||
| *Drive belts (indicate belt used by letter) | Fan | |||||||||
| Generator or alternator | A | B | A | B | H | H | ||||
| Water pump & fan | A | B | A | B | H | H | ||||
| Power steering | B | B | G | G | ||||||
| Air conditioning | D (E) | E D | I | |||||||
| Crankshaft | A C | B C | A D | B D | H G | H G I | ||||
| Idler or (Air Pump) | (C) | (C) | D (E) | (E) D | (H) | (H) I | ||||
| *Drive Belt Dimensions | A | B | C | D | E | F | G | H | I | J | K |
| Angle of V | 36 | 36 | 36 | 36 | 36 | 36 | 36 | 36 | |||
| Normal length (SAE) | 43.25 | 53.00 @ | 36.75 | 41.50 | 39.00 | 42.00 | 51.00 | 54.25 | |||
| Width | 3/8 | 3/8 | 1/4 | 1/2 | 1/4 | 15/32 | 15/32 | 1/2 |
| @ Dual Belts |
| Page 11 | |
|
|
| Copyright 1999 - 2007 Mustang II Network - Privacy Policy |
| |
